The construction of clean room panels is an important part of clean room construction, and reasonable construction operations and precautions can ensure the quality and performance of the clean room. This article will introduce the precautions for clean room panel construction.

1、 Preparation before construction:

Material preparation: Before construction, the cleanroom panels should be inspected to ensure that their quality and performance meet the requirements. At the same time, it is necessary to prepare the tools and equipment required for construction.

Construction plan: Develop a detailed construction plan, including the installation sequence, fixing method, sealing treatment, etc. of the panels. According to the design requirements of the clean room, arrange the construction process reasonably to ensure the smooth progress of the construction.

2、 Construction operation precautions:

Safety protection: Construction personnel should wear protective equipment such as helmets, goggles, masks, etc. to ensure safety during the construction process.

Clean environment: The construction site should be kept clean to avoid contamination of the board by dust, debris, and other contaminants. Cleaning work should be carried out before construction to ensure a clean and tidy construction environment.

Board storage: The board should be stored before construction to avoid prolonged exposure to direct sunlight and prevent deformation due to moisture.

Board installation: Install the board according to the requirements of the construction plan. Pay attention to the flatness and verticality of the board to ensure that it is installed firmly and smoothly.

Fixing method: The fixing method of the board should be selected appropriately, such as screw fixing, adhesive fixing, etc. Pay attention to the material and specifications of the fasteners to ensure their firmness and stability.

Pipeline crossing: During the construction process of sheet metal, pipeline crossing may be necessary. Pay attention to the location and method of pipeline crossing to ensure the integrity and sealing of the board.

Sealing treatment: The joints of the board should be sealed to prevent the leakage of air and particles. Sealing materials such as sealant and sealing strips can be used for sealing treatment.

Follow up processing: After the completion of the board construction, cleaning and tidying work should be carried out. Clean up the garbage and dirt generated during the construction process, and maintain the cleanliness and safety of the clean room.

3、 Quality acceptance:

Construction acceptance: After the construction is completed, a quality inspection of the construction must be carried out. Check the installation quality, fixation firmness, joint sealing, etc. of the board to ensure that the construction quality meets the requirements.

Functional acceptance: After the construction of clean room panels is completed, functional performance acceptance should be carried out. Check the cleanliness, air flow, temperature and humidity control of the clean room to ensure that its performance meets the requirements.

By following the above construction precautions, the quality and performance of clean room panel construction can be ensured. During the construction process, it is necessary to strictly follow the construction plan and conduct quality acceptance to ensure that the quality and performance of the clean room meet the expected results.